Shopping cart is empty.

Explore By

PT003 – Planar tension testing:

Load/unload cycles


Description

A planar tension test is performed at a given crosshead speed. The specimen is loaded to a specified strain or stress level and then unloaded at the same crosshead speed to zero load. This process is repeated for the desired number of load and unload cycles at the desired strain or stress levels. Strain is measured using a non-contact extensometer.

Example Data

      
       

Temperature Options

This test can generally be performed at any temperature between -80ºC and 250ºC.

  • CT: Cryogenic temperatures (-80ºC to 20ºC)

  • RT: Room temperature (~ 20ºC)

  • HT: High temperatures (20ºC to 250ºC)

Strain Rates

Strain rates up to ~ 1/s are possible, depending on specimen geometry.

Data Provided
       

Time, Engineering Strain, Engineering Stress, Load, Crosshead Displacement, Extensometer Measurement
 

Specimen Requirements
       

Specimen must have a width-to-height ratio of 10:1.

Note that we request extra specimens to ensure a sufficient supply of specimens for valid testing.

Veryst can also assist in molding standard and non-standard test specimens.  Please contact us if you are interested in discussing this option.

Replicates Recommended

3

More Information

For a customized quotation, please click the button below and indicate the Test ID (e.g., PT001, PT002), type of material, test temperatures and any other details (specimen geometries available, other unique constraints, etc.)


Call Us
Email
Print

To contact Veryst, please call:

+1-781-433-0433

Close