Shopping cart is empty.
2017-10-12 - Advanced Finite Element Modeling of Solid Polymers (Part 2)

Advanced Finite Element Modeling of Solid Polymers (Part 2)

Two-Day, Online Training Class

This class is an extension of the original Part 1 class, and covers in more depth the theory of different material models, and hands-on exercises designed to teach how to use the different models to solve real problems.

Details:

Veryst Engineering, 47A Kearney Road, Needham, MA 02494, USA

Thursday, October 12, 2017 11am - 2pm
3pm - 4pm
Web-based Course
Offline Workshop Support
Friday, October 13, 2017 11am - 2pm
3pm - 4pm
Web-based Course
Offline Workshop Support

(*EDT - Eastern Daylight Time)

Course Instructor

Jorgen S. Bergstrom, Ph.D.

Principal Engineer

Learn More

Dr. Bergstrom is a Principal Engineer at Veryst Engineering, LLC, and consults primarily in the modeling, testing, and failure analysis of mechanical behavior of polymer materials. He is the author of Mechanics of Solid Polymers: Theory and Computational Modeling, a comprehensive book that explains how solid polymers behave, how they can be experimentally characterized, and how to predict their behavior in different load environments.

Dr. Bergstrom received his Ph.D. from M.I.T. in the area of computational polymer mechanics, and has lectured in the Department of Mechanical Engineering at M.I.T.

Prerequisites

The training class is intended for people with experience running finite element simulations of different polymers (rubbers, thermoplastics, thermosets, biomaterials, etc). It is recommended, but not necessary, to have taken one of our introductory polymer modeling classes [Finite Element Modeling of Solid Polymers (Part 1), or Experimental Testing of Solid Polymers for Finite Element Modeling].

Learning Objectives

By the end of the class you will:

  • Know the strengths and weaknesses of both simple material models (hyperelasticity, linear viscoelasticity, and metal plasticity) and advanced material models (e.g. Bergstrom-Boyce, Three Network Model, Parallel Network Model).
  • Know what experimental tests are necessary and sufficient for calibrating any material model.
  • Be able to calibrate quickly any material model using the MCalibration software.
  • Be able to use any of the standard built-in material models, or any of the material models in the PolyUMod library, to simulate the response of polymer products.

Course Outline

  • Elasticity/hyperelasticity: review of hyperelastic models
  • Linear viscoelasticity theory: strengths and limitations of the theory, including time-temperature superposition
  • Metal plasticity theory: strengths and limitations of metal placticity model for polymer simulations
  • User-material models in Abaqus and ANSYS, including advanced viscoplastic constitutiuve models incorporating rate and temperature dependence
  • Advanced finite element simulations of different classes of polymers
  • Material parameter extraction techniques using MCalibration and the PolyUMod library of user material models.
  • Previous attendees had this to say...

  • “I gained a tremendous amount of knowledge on topics which would normally be taught in a semester-long course.”
  • “Very valuable for design engineers running FEA on thermoplastics and elastomers.”
  • “Gained a good overall introduction to the mechanics of polymers”
  • “I would highly recommend this class to my students.”
  • “Will/has helped us revisit legacy material modeling and material testing.”
  • “Great value. Two days of training saved weeks of engineering work.”
  • Course Materials

    Everyone who registers for the course will receive a free 1-month license to the MCalibration software and the PolyUMod Library of User-Material Models. A license to Abaqus or ANSYS is not provided and it is not necessary to have Abaqus or ANSYS installed for the class. Training class notes will be provided in .pdf format. Notes are for personal use and may be printed, but cannot be modified, shared or redistributed.

    Registration

    To register for the October 12 & 13, 2017 Advanced Finite Element Modeling of Solid Polymers web-based course:

    Use our secure online registration form (see below) or print out this page and submit by one of the following:
    Scan and email to: seminars@veryst.com
    Fax to: 781.433.0933
    Mail to:
    Seminars
    Veryst Engineering
    47A Kearney Road
    Needham, MA 02494

    The fee for this two-day course is $600.

    Deadline for registration is: Friday, September 29, 2017. Registration after this date will incur a late registration fee of $400 per student.

    Cancellation Policy

    Veryst reserves the right to reject registrations and to cancel a training class based on class size. A full refund will be made if a class is canceled. If a participant cancels a registration more than 5 days before the class then an 80% refund will be given. There is no refund for cancellations during the last 5 days before the class.

    Click Here to Register
    Call Us
    Email
    Print

    To contact Veryst, please call:

    +1-781-433-0433

    Close